MOTION
CONTROL SYSTEMS
COMPLETE
CLOSED LOOP 3 AND 4 AXIS MOTION CONTROL SYSTEMS WITH 'NEMA 23' SINGLE STACK
MOTORS
(as used in the MAXNC 10 CL machine)
Powerful motion system set up to be controlled from a single standard parallel port from a PC computer, using the included MAXNC CL2 software for "G" code format, or using custom software from the user. Motors are capable of over 1,000 RPM with 1.8 Deg. Shaft resolution ( 4 times the speed and power of the open loop 145 oz. System). Includes: Controller with power supply; 3 or 4 motors with encoders; Motor and encoder cables; Parallel port cable; CL2 driver software for PC computers with manual.
CL2 software
features: · "G" & "M" code programming · Linear interpolation · Circular
interpolation · Helical interpolation · Backlash compensation · Keyboard jog
mode · Automatic cycle · Line by line cycle · Tool length and tool radius
compensation table · Spindle motor on and off · Spindle speed control from
program · Screen update and acceleration/deceleration inhibit (G64) for
un-interrupted contouring, and more.
If the controller is to be used with other driver software, it requires only 2 output lines per motor from the parallel port, in quartered mode, and 2 input lines total for feedback. 4 axes can be driven with a single parallel port.
With single stack motors (as shown)
P/N 22155... 3 axis Motion
Control System ………………………….……...….........$ 875.00
P/N 22160... 4 axis Motion Control System ………………………….……..…..........$
975.00
P/N 22156... 3 axis Retrofit Kit for Maxnc 10 or 15 (includes limit
Switches.).....$ 895.00
P/N 22161... 4 axis Retrofit Kit for Maxnc 10 or 15 (includes limit
Switches.)…..$ 995.00
With double stack motors (up to 210 oz/in)
P/N 22222... 3 axis Motion
Control System ………………………….......………....$ 1,150.00
P/N 22224... 4 axis Motion Control System ………………………….…….......…...$
1,325.00
